Standard FR4 PCB


This option is set for how many circuit layers in your design. Please try to design your board with fewer circuit layers because multi-layer board is not cheap.

1 Layer 2 Layer 4 Layer 6 Layer 8 Layer 10 Layer

The maximum length and width of your board. Dimension limitation is minimum 10mm and maximum 500mm for an online quotation. Contact us for additional sizes.

PCB Quantity:

The quantity of boards you require. If it's panel, please input the panel quantity.

  • Other Quantity: (Between 100 and 100k)
  • Other Quantity: (Between 100K and 10M)
    Note: After you submit the enquiry, one of our sales representative will contact you for further business discussion.
Total area:
Separated different Design:

Number of separated different designs included in your Gerber file. Please learn more if you are unsure about the amount.

Panalization Type:

If you require panelized PCBs, you can either define it by yourself in your Gerber file or we can help you define it (for our help please select, “Custom”).

Single Board As in My Gerber Files Custom
X: Y: Tooling Rail:
mm on direction
TG Requirement:

The standard FR4 Tg is between 130 – 140°C, the median Tg is 150 °C and the high Tg is greater than 170°C. In the hot state, high Tg FR4 will have better mechanical and chemical resistance to heat and moisture than standard FR4.

TG135 TG155 TG170
PCB Thickness:

Board thickness tolerance is +/-10%. Solder mask and copper plating will make the boards thicker.

0.4 0.6 0.8 1.0 1.2 1.6 2.0 2.4 3.0
Solder Mask Color:

Note: The silkscreen color is white for all solder mask colors except the white solder mask. For white solder masks, the silkscreen is black.

Green Red Yellow Blue White Black Purple Matte black
Copper Thickness:

This parameter is for the Top/Bottom layer circuits’ copper weight.

1oz 2oz 3oz
Surface Finish:

Extra process to exposed copper to help solderability.

HASL HASL (Lead Free) ENIG (Immersion Gold) OSP Hard Gold Immersion Silve ENEPIG
1U" 2U" 3U"
Min Traces/Spacing:

The minimum width of the trace /space in your PCB.

6mil ↑ 5mil 4mil 3.5mil
Min. Hole Size:

The minimum drilling size of the hole in your PCB.

0.3mm ↑ 0.25mm 0.2mm
Special Requirements:

Should half-cut holes on the edge of the PCB be made with copper? This will allow it to be soldered to another PCB.

Gold Finger is adding plating on the edge of PCB. This may be to ensure a good ground to a metal casing or for shielding purposes. Or to advid microwave leaking from PCB edge.

The online quotation is for 1-order blind/ buried vias. If your board is more complex our customer service will contact you for extra charge.

The partial edge of the PCB plated with copper

The resistance to the flow of current, represented by an electrical network of combined resistance, capacitance and inductance reaction, usually in high-frequency circuits.

Apply to multilayer pcbs only.Stack-up refers to the arrangement of copper and insulating layers that make up a PCB before starting board layout design.

The microvias filled with non-conductive epoxy then capped and plated over.

Carbon ink creates surface resistors and a protective contact surface for switches.

The microvias filled with aluminum sheet then capped and plated over.

Halogen-free PCB, it should have less than 900 parts per million of chlorine or bromine, with less than 1,500 ppm of total halogens.

Gerber File:
pcb price loading

Pricing And Build Time

PCB Cost:
Build Time Total

PCB Cost:


Note: shipping cost will be applied when you check out.
Weight: 0kg Shipping Cost Est: