Standard FR4 PCB Aluminum Base PCB SMD-Stencil Quote

Standard FR4 PCB

Layers

This option is set for how many circuit layers in your design. Please try to design your board with fewer circuit layers because multi-layer board is not cheap.

1 2 4 6 8 10
Dimension

The maximum length and width of your board. Dimension limitation is minimum 10mm and maximum 500mm for an online quotation. Contact us for additional sizes.

PCB Quantity

The quantity of boards you require. If it's panel, please input the panel quantity.

PCS
  • 5
  • 10
  • 15
  • 20
  • 25
  • 30
  • 50
  • 75
  • 100
  • 125
  • 150
  • 200
  • 250
  • 300
  • 350
  • 400
  • 450
  • 500
  • 600
  • 700
  • 800
  • 900
  • 1000
  • 1500
  • 2000
  • 2500
  • 3000
  • 3500
  • 4000
  • 4500
  • 5000
  • 5500
  • 6000
  • 6500
  • 7000
  • 7500
  • 8000
  • 8500
  • 9000
  • 9500
  • 10000
  • 15000
Other:

Note: After you submit the enquiry, one of our sales representative will contact you for further business discussion..

Total area:
Separated different Design

Number of separated different designs included in your Gerber file. Please learn more if you are unsure about the amount.

Panelization Type

If you require panelized PCBs, you can either define it by yourself in your Gerber file or we can help you define it (for our help please select, “Custom”).

Single Board As in My Gerber Files Custom
X: Y: Tooling Rail:
mm on direction
TG Requirement

The standard FR4 Tg is between 130 – 140°C, the median Tg is 150 °C and the high Tg is greater than 170°C. In the hot state, high Tg FR4 will have better mechanical and chemical resistance to heat and moisture than standard FR4.

TG135 TG155 TG170
PCB Thickness

Board thickness tolerance is +/-10%. Solder mask and copper plating will make the boards thicker.

0.4 0.6 0.8 1.0 1.2 1.6 2.0 2.4 3.0
Solder Mask Color

Note: The silkscreen color is white for all solder mask colors except the white solder mask. For white solder masks, the silkscreen is black.

Green Red Yellow Blue
White Black Purple Matte black
Copper Thickness

This parameter is for the Top/Bottom layer circuits’ copper weight.

1oz 2oz 3oz
Surface Finish

Extra process to exposed copper to help solderability.

HASL HASL (Lead Free) ENIG (Immersion Gold)
Hard Gold Immersion Silve ENEPIG
1U" 2U" 3U"
Min Traces/Spacing

The minimum width of the trace /space in your PCB.

6mil ↑ 5mil 4mil 3.5mil
Min. Hole Size

The minimum drilling size of the hole in your PCB.

0.3mm ↑ 0.25mm 0.2mm
Special Requirements

Should half-cut holes on the edge of the PCB be made with copper? This will allow it to be soldered to another PCB.

Gold Finger is adding plating on the edge of PCB. This may be to ensure a good ground to a metal casing or for shielding purposes. Or to advid microwave leaking from PCB edge.

The online quotation is for 1-order blind/ buried vias. If your board is more complex our customer service will contact you for extra charge.

The resistance to the flow of current, represented by an electrical network of combined resistance, capacitance and inductance reaction, usually in high-frequency circuits.

The partial edge of the PCB plated with copper

Apply to multilayer pcbs only.Stack-up refers to the arrangement of copper and insulating layers that make up a PCB before starting board layout design.

The microvias filled with non-conductive epoxy then capped and plated over.

Carbon ink creates surface resistors and a protective contact surface for switches.

Halogen-free PCB, it should have less than 900 parts per million of chlorine or bromine, with less than 1,500 ppm of total halogens.

The microvias filled with aluminum sheet then capped and plated over.

Remark
Gerber File

SMD-Stencil QuoteOrder together with PCB

Stencil Type

Frameless stencil without aluminum frame, the dimensions equal to the valid area.

Frame Frameless
Stencil Dimensions

Please make sure your PCB size is within the valid area. Especially, the stencil size should be at least twice the PCB size of the option "Top and Bottom".

Stencil Side

The option "Top and Bottom" means both are on the same stencil.

Top and Bottom Top Bottom Top and Bottom (On Separate Stencil)
Stencil Quantity

The quantity of stencils you require.

- + PCS
Fiducial Mark

Fiducial Mark is designed to help the SMT placement machine to check the location.

None Half Lasered Lasered Through
Polishing Technique

BGA plating is also called Electropolishing. If your board has BGA, we highly recommend you to choose BGA Plating.

Polishing Electropolishing
Remark
pcb price loading

Instant Quote

  • PCB Cost:

  • Discount:

Production Time
Total:

Note: shipping cost will be applied when you check out.
Shipping Cost Est:
Total (incl. shipping):